Explosion protection and prevention

Combustible dusts with a small particle size or a sufficient density distribution of the dust in the atmosphere – there are some requirements for an explosion. Even a small dust deposit can result in a dangerous, explosive mixture when stirred up.

Therefore, explosion protection measures should always be taken so that you and your employees can work under the best conditions. For this purpose, we supply and integrate various devices for explosion protection.

Let’s also talk about your explosion protection. Just get in touch with our contact persons and we will find your individual solution.

Explosion vent

According to the respective zone classification, our plantand devices have a defined degree of protection. Explosion relief in filter systems specifically prevents overpressure. For this purpose, we equip our filter systems with rupture discs.

Explosion decoupling

To prevent the propagation of local explosion events via upstream and downstream plant, our own protection systems such as pipe check valves are used. These protective systems are type-tested and certified by test facilities.

Explosion suppression devices

Already during the development of a possible explosion, it is detected by the most precise sensor technology. Suitable extinguishing agents are then sprayed into the piping or equipment to stop an explosion.

Fire protection

By using special sensors, extinguishing systems are triggered in the event of temperature and smoke gas development. These can be attached to both the filter and piping.

References

No results found.

News

No results found.